Lab 2 | Digital IO

Part 1: Breakout Board

The breakout board was soldered in parallel with two LEDs, two resistors, and single-core wire. The schematics are as follows: 

Part 2: Digital Input/Output:

Digital inout was received by a switch placed on the breadboard with input to Pin 3 of the Arduino. Output was achieved through the breakout board assembled in part 1, attached to Pin 2 of the Arduino.

Arduino Code: https://gist.github.com/BenGillespie303/58eccba3b80aa1f6711a375cae4328e3

 

 

 

Comments(0)

Leave a Comment